Product Description
Stable & Simple Operation * Small Occupied Area * Good bearing capacity, Long Lifetime * Reduce labor costs * Beautiful Appearance
Product TypePowder Coating System-Customized and Complete Fully Automated1. Pre-treatment system(Dipping tank/spraying/shotblasting)
2. Drying oven for chemical pretreatment
3. Powder coating
4. Powder curing oven
|
|
Process Name
|
Mode
|
Tempreture (ºC)
|
Time (min)
|
Remark
|
|
Inspect Workpiece
|
|
RT
|
|
|
|
Loading Workpiece
|
Automatic
|
RT
|
|
|
|
Pretreatment
|
Automatic
|
RT
|
|
customized/
as per the chemical
|
|
Drying
|
Automatic
|
100-150
|
|
customized
|
|
Powder Coating
|
Automatic
|
RT
|
1-3
|
customized
|
|
Curing
|
Automatic
|
180-220
|
10-15
|
customized
|
|
Cooling
|
Automatic
|
RT
|
|
customized
|
|
Unloading
|
Automatic
|
RT
|
|
|
|
Inspection & Package
|
|
RT
|
|
|
|
Pretreatment System
Spraying Pretreatment
Spraying Pretreatment Stainless Steel Chemical Tank With Pump Spraying Nozzle Stainless Steel Spraying Tunnel
Process steps
Every process step consists of a tank with one or more strong vertical pumps distributing the liquid to a number of rinse ramps fitted with nozzles.
Pumps
The pumps are all highly efficient and made of acid proof steel. All motors are 100% IEC standard with no modification, and very easy to replace if needed.All pumps are tested and certified according to the HANNA quality control. They are mounted vertically in the tanks and immersed in the liquid.Reverse cascade system saves water
The rinse water is lead through the line in a reverse cascade rinse to minimize consumption of rinse water. We always design our systems with a minimum of two rinse steps, often even three.The design includes pre and after rinse systems, electronically controlled and ensuring minimal consumption of water, energy and chemicals.
Nozzles
The rinse ramps are made of stainless steel, and the quick clip-on nozzles are made of plastic. This is a very rigid
construction.Also memory nozzles are a possibility, making the cleaning and the service very easy. Both types are easily replaced.
Dip Tank Pretreatment
Powder Coating Booth
Quick Coloar Change Powder Coating Booth With Cyclone Quick Assemble Filter Recovery Powder Coating Booth
Drying&Curing Oven
Bridge Type Oven Tunnel Type Oven Box Type Oven
Hanna Oven Advantages:
1. Has Air Curtain At The Both Ends , The Hot Air In The Oven Won't Dissipate To Outside,Saving The Fuel .
2. Curing Oven Insulation Board Are All Plug-In Board ,Seamless Docking ,Thermal Bridge Transmission Technology.
3. Hot Air Circulation Air Supply And Return Reach A Balance ,Reasonable Layout ,Uniform Oven Temperature . After Testing ,the Temperature Difference In the Oven is Less Than ± 3 ºC.
150mm thickness insulation layer Inside view for our curing oven Oven temperature tracker record
At Hanna, we do more than just build equipment and powder coaing lines.
Our staff includes coating system designers, powder and chemistry experts, control systems engineers, technical support personnel, installation technicians and experienced trainers.
We build equipments with Hanna and Zhanyao brand, but also we work directly with OEM clients to provide "private label" powder coating equipment manufactured to their specifications.
We've built thousands of optimal customized lines and systems for powder coating operations across China and around the world. Hanna's list of satisfied clients includes successful small manufacturers, government organizations, and global corporations.
You won't find a better combination of quality, value and support anywhere in this industry. Each piece of equipment is built to meet your specific needs. To make sure you get the best results, our factory-authorized technician team will help you work through the details and get the results you need. We will design, build, deliver your automated system and if more services needed, we can help to install, fine-tune and train your operators to get premium results.
Project Cases
Our Advantages
1. Hanna intelligent gun, unique circuit board design, Complete solve the problem of workpiece powder grooves on the dead angle, groove with powder.
2. Hanna is unique to the wind system which make the effective temperature difference control furnace temperature fluctuate 3 ºC, ensure that products without color difference, coating dose not fall off.
3. Hanna big cyclone recovery system powder recovery rate as high as 99.2%,ensure no dust spillover.Unique fast
color change powder supply center, change color only 10 to 15 minutes.
Service assurance:
1. Provide complete information, including equipment drawing, electrical circuit control chart and use maintenance instruction.
2. Equipment troubleshooting method.
3. Provide the list of consumables to assist customers in establishing a comprehensive equipment maintenance system.
4. After the equipment is delivered to the customer, our company will send professionals to track the customer
equipment for 60 days.
5. If customer has a device failure in the process of using the device, our company will operate the device remotely through the computer network through the authorization given by the customer, and eliminate all equipment failure
problems.
6. Any problems with the equipment, our company guarantees to give solutions within 12 hours.
7. The warranty period of the equipment is 2 years. In 2 years, spare parts will be provided free of charge for any problems caused by non-human factors.
Company Profile
Since 1990, from simple manual spraying to automatic powder spraying system. We can provide you with innovative, rational and economical solutions. We can support you with advanced technologies.Delivering the best powder coating equipments and turn-key solutions. We've built thousands of optimal customized lines and systems for powder coating operations across China and around the world. Our continuous research on the field as well as our constantly developing techniques and innovative nature of our engineering dpt. enable our customers to catch up to the latest developments by modernizing their equipment partly or wholly, so as to improve performance, increase profits and maintain their competitiveness in the world of trade. Our company has passed ISO9001 certification,CE certification, and has obtained more than 70 patents.
FAQ
Are you a trader or a factory?
We are manufacturer and exporter. Our own factory was found in 1990,Our export office was established in 2014.
What should I provide if interested in your powder coating equipment ?
A. The material/size(max)/weight(max)of your workpiece.
B. How many of your daily output(one day=8hours,one month=30days)?
C. What heating power do you prefer: electric,gas, diesel or coal?
D. The size of your factory(length, width and height)?
How to ensure the quality of the equipment?
A. We have hundreds of patents and passed the IS9001:2015 quality management system certification.
B. The Technical Review Committee,reasonably determines and divides the stages of design, production, installation and
commissioning, and formulates detailed progress plans for each stage, Strengthen the quality assurance system and quality protection measures of equipment manufacturing department.
C. We manning quality inspectors specially to control the processing quality of product strictly.
How to install equipment after purchasing your equipment?
A. We will provide installation information and installation videos
B. Our engineers will guide the installation and run the equipment.
C. After the debugging, will provide complete training and track customer device usage.
How is your company's after-sales service done?
A. Provide the list of consumables to assist customers in establishing a
comprehensive equipment maintenance system.
B. After the equipment is delivered to the customer, our company will send professionals to track the customer equipment for 60 days.
C. If customer has a device failure in the process of using the device,our company will operate the device remotely through the computer network through the authorization given by the customer, and eliminate all equipment failure problems. D. Any problems with the equipment, our company guarantees to give solutions within 12 hours.
Audited Supplier 
){kind=link}
){kind=link}