Product Description
At Hanna, we do more than just build equipment and powder coating lines.
Pre-Sales Service:
* Inquiry and consulting support.
* Design Program support.
* View our Factory.
After-Sale Service:
* Installation&Training
* Engineers available to service machinery overseas.
* Spare parts supply
What Are The Advantages of Dip Coating?
Dip coating is a simple and effective technique which is commonly used in manufacturing across a wide range of different industries. Within research and development, it has become an important coating method for the fabrication of thin films using a purpose-built dip coater. When the process is optimised, dip coating can be used to produce highly uniform films. Importantly, key factors such as film thickness can be easily controlled.
Production process flow:
Pre-treatment → Upper workpiece → High temperature preheating → Dipping → Plasticizing and leveling → cooling
(Air cooling)→Finished product→Inspection→Packing→Ship.
|
Process Name
|
Mode
|
Temperature(ºC)
|
Time
|
|
Loading
|
Manual
|
RT
|
2-5mins
|
|
Pre-heating
|
Automatic
|
180-300
|
10mins
|
|
Dipping Coating
|
Automatic
|
RT
|
3-5mins
|
|
Curing
|
Automatic
|
180-300
|
20mins
|
|
Cooling
|
Automatic
|
RT
|
10-15mins
|
|
Unloading
|
Manual
|
RT
|
3-5mins
|
Performance characteristics: high degree of automation, reliable operation, low maintenance cost. Product outHigh production efficiency, consistent mass production of coatings, precise controllable coating thickness.
High Temperature Pre-heating and curing Oven
The body of the high-temperature preheating furnace adopts 200mm composite silicate rock wool board jointed by the upper and lower cladding angles, which has the characteristics of beautiful appearance, small thermal conductivity and good insulation effect. The inlet and outlet are equipped with two-way sliding doors to effectively prevent the hot air from spilling out, and the inlet and outlet of the chamber is equipped with an exhaust fan to automatically discharge the exhaust gas from the preheating chamber.The thermal energy system of the high temperature preheating chamber adopts SUS304 infrared heating tube to rapidly heat the workpiece. The power controller is adopted for the drying group control to automatically heat the workpiece efficiently and reduce the consumption of electric energy to the maximum exten
Dipping Chamber Body
The chamber body is composed of a skeleton, a wall panel, a filter unit for the top layer, a convenient door, a lighting device, a window, a grille, etc.Both sides of the chamber are more than 800mm from the ground to install the lighting glass, the height of the lighting glass is 1000mm, the use of 5mm thick tempered glass, the chamber glass adopts film protection to prevent the pollution of the glass surface, when the paint particles on the glass too much can be replaced with the film.
Conveyor Transport System
Cycled operating lines feature high flexibility and suitability for lower throughputs, wide range of parts or large dimension parts for treatment. Continuous operating lines using overhead chain conveyor are suitable for high productivity, high capacity requirements and for high throughputs of same or similar parts.
Electric control system
Pre-heating control system, dipping room control system, conveyor control system, curing oven control system.
Case Stroies
Installation Site
Packaging & Shipping
About Us
Hebei Hanna Powder Coating Equipment Technology CO., LTD has over 29 years rich experiences of the R&D and manufacturing in China,From simple hand coating through to fully automated powder coating. Our products are designed for you to customize the automatic spraying assembly line;
These include: Electrostatic spraying machine,Electrostatic spraying gun,Automatic elevating equipment,quick change of color powder room,Powder recovery equipment,Multi-function spray room, Spray paint room, telescopic
spray paint room, Pretreatment equipment, spray, hot air furnace, biological granule combustion machine, gas burner, electric heating oven, curing oven, chain suspension conveying equipment, etc. And through to CE, ISO 9001 standards.
Customer Visit
FAQ
Are you a trader or a factory?
We are manufacturer and exporter, our factory was found in 1990, our export office was established
in 2014.
What should I provide if interested in your powder coating equipment ?
A.The material/size(max)/weight(max)of your workpieces.
B.How many of your daily output(one day=8 hours,one month=30 days)?
C.The size of your factory(length, width and height)?
How to ensure the quality of the equipment?
A. We have hundreds of patents and passed the IS9001: 2015 quality management system certification.
B. The Technical Review Committee,reasonably determines and divides the stages of design, production, installation and
commissioning, and formulates detailed progress plans for each stage,Strengthen the quality assurance system and quality protection measures of equipment manufacturing department.
C. We manning quality inspectors specially to control the processing quality of product strictly.
How to install equipment after purchasing your equipment ?
A. We will provide installation information and installation videos.
B. Our engineers will guide the installation and run the equipment.
C. After the debugging, will provide complete training and track customer device usage.
How is your company's after-sales service done?
A. Provide the list of consumables to assist customers in establishing a comprehensive equipment maintenance system.
B. After the equipment is delivered to the customer, our company will send professionals to track the customer equipment for 60 days.
C. If customer has a device failure in the process of using the device, our company will operate the device remotely through the computer network through the authorization given by the customer, and eliminate all equipment failure problems.
D. Any problems with the equipment, our company guarantees to give solutions within 12 hours.
){kind=link}