A: hanna powder coating line
*Pollution free operation.*Safe to operate*Maximum recovery efficiency.*Durability.*Quick colour change.
1,Hanna powder coating equipment absorbed European technology to develop generation intelligent gun, unique circuit board design,Complete solve the problem of workpiece powder grooves on the dead angle,groove with powder.
2,Hanna powder coating equipment technology unique to the wind system which make the effective temperature difference control furnace temperature fluctuate 3 ºC,ensure that products without color difference,coating dose not fall off.
3,Our company using the internationally recognized big cyclone recovery system powder recovery rate as high as99.2%,ensure no dust spillover.Unique fast color change powder supply center, change color only 10 to 15 minutes.
A: hanan powder coating line
1,No dust spillover, reduce powder waste.
2,Quick color change (10-15 minutes automatic color change), Multi-color change.
3,Powder recovery rate as high as 99.2%
4, Fifth generation of intelligent spray gun, the workpiece groove has no bottoming phenomenon.
5, Full consider the need for color change, easy to clean,Save labor time.
6, Key mechanical parts and electrical components of the equipment adopt the world's top brand products to ensure reliable operation and durability.
7, Beautiful appearance, fine workmanship.
A: hanan powder coating line
If you want to custom made aluminium alloy powder coating line,pls tell us the following specifications:
1.The size of your workpiece .
2.The output of your workpiece(one day=8hours,one month=30days).
3.How many colors do you need to spray?
4.The heating power you prefer:electric,gas,diesel,or coal.
5.The size of your factory(length,width and height).
We could make the design according customer's requirements.Pls contact with me and we will give you the quick reply.
| Equipment |
Application |
| Pre-treatment System |
Better powder coating of the work-piece. |
| Powder Coating Room |
Spraying on the surface of the work-piece. |
| Big Cyclone |
Automatic fast color change. |
| Transport System |
Delivery of work-pieces. |
| Curing Oven |
It makes the powder attaching to the work-piece. |
| Heating System |
The fuel can choose diesel oil,gas,electric etc. |
How to design an optimal solution
1. Comprehensive analysis of customer cost budget and capacity requirements, select manual delivery mode; 2. Delivery method: Manual 3. Comprehensive analysis of workpiece weight, size, shape and other factors, select the ground rail mode and design the optimal running length.
we did many aluminum profile project :
Dipping system and automatic powder coating line
automatic spray preptreatment on the powder coating line
cyclone fast color change powder coat line
power and free conveyor system powder coat line
manual painting system
automatic dipping system
Welcome to send your request to us and we will check the best line for you according to your output and workshop size .
The main advantages of the powder coating system design
Design the whole line to cover less workshop space. Make sure the best running of the whole line with the workpiece and easier operations of workers. High quality materials with professional design and productions. The line will be assembled and tested before delivery ( clients will be warmly welcomed to visit and inspect the quality and operations at any time) 3D assemble drawings will be sent to help clients do assemble works very easy and efficient. Make arrangements in advance to make sure the products be delivered in time. Use space mostly, easier operations, high working efficiency, low noise, environmental friendly. All details should be made based on the details clients supplied and confirmed;
|
Equipment
|
Application
|
|
Pre-treatment System
|
Better powder coating of the work-piece.
Dip tank pretreatment
Spraying pretreatment
|
|
Powder Coating system
fast color change
|
Big cyclone + secondary filter recovery
Simple filter recovery
|
|
Conveyor Transport System
|
Manual conveyor
Fully automatic conveyor system
|
|
Curing Oven
|
It makes the powder attaching to the work-piece.
Tunnel oven, bridge oven, box oven .
|
before give you the design and quotation, we need to know below :
1,What is the products and max size and max weight of products?
2,What is the capacity of products by a working day?(Based on 8 hours)
3,Which kind of heat resource you will choose?Gas,Diesel or only electric?
4,What is the size of your workshop?(Include the length,width and height)
5,How many colors you will spraying on your products?
Base on these information, we will design the suitable powder coating line for you , auotmatic line or manual coating line or power and free conveyor . semi-automatic paint line , and so on.
Since 1990, Hanna Technology have grown into a star company in powder coating field. From simple hand coating through to fully automated powder coating, We are capable of offering our clients perfectly cost-effective, reasonable, advanced solutions. With Hanna's proud technology, you will have your best painting device and system line. Our values: Never compromise on design safety, integrity, efficiency, and reliability. Give reasonable design and never sell customer more than they need. Give help whenever customer call. Never stop trying to refine our solutions. Loading automatic through the booth and autoamtic spraying the powder . automatic move to the curing oven from the booth Manul push and pull through the oven Automatic move from the another side to unload.
HANNA focus on :
electrostatic powder coating equipment,powder coating machine,paint plant,powder coating line.
Welcome to join us now
){kind=link}