5-Stage Pretreatment Process Drying Oven Powder Coating Booth

• Customization: Available
• After-sales Service: Provide
• Warranty: Provide
• Model NO.: FA
• Type: Coating Production Line
• Coating: Powder Coating
• Substrate: Steel
• Certification: CE, ISO
• Condition: New
• Color: Color
• Equipment Warranty: 2years
• Transport Package: Choose According to Customer Needs
• Specification: customized
• Trademark: HANNA
• Origin: China
• HS Code: 8424300000
• Production Capacity: 20 Sets/ Year

Product Description

Automatic Spray Pretreatment
Spray Pretreatment Technological Process

Process Name	Mode	Temperature(ºC)	Time	Remark
Degrease	Spraying	50-60	3mins
Rinse 1	Spraying	RT	1min
Rinse 2	Spraying	RT	1min
film	Spraying	RT	1min
rinse 3	sprying	RT	1 MIN
* All the pretreatment time confirm by chemical supplier

Pre-treatment Spraying pictures


Pre-treatment spraying Configuration

1	Spray shed L1.4xW1.2xH4m	All use stainless steel plate SUS304 material, vertical plate 1.5mm, continuous welding after bending.
2	Spray tank 5 pcs	It is welded by stainless steel plate SUS304/2.0mm.

3	Spray pump 5 pcs	Adopt maintenance-free upright pump, dry oil seal, anti-idling and anti-corrosion.
4	Pipelines, nozzles, valves	Material pp
5	Filters	At all bath tanks, AISI 304 stainless steel wire filters
6	Maintenance and pressure adjustment valves	Valves which are installed between spray pumps and liquid tanks are ensuring removal and repair in case of malfunction without liquid loss.
7	Spray collectors and pipes	The spray collectors will be installed to suitable active sections and the spray pipes will be tightened to the collectors by using brackets.
8	Exhaust aspirator	2 pcs of 800 m3/h capacity exhaust fans are located at the top of the tunnel.
9	Suspension chain protection system	Closed brush on top of shed

A:  hanna powder coating line

*Pollution free operation.*Safe to operate*Maximum recovery efficiency.*Durability.*Quick colour change.
1,Hanna powder coating equipment absorbed European technology to develop generation intelligent gun, unique circuit board design,Complete solve the problem of workpiece powder grooves on the dead angle,groove with powder.
2,Hanna powder coating equipment technology unique to the wind system which make the effective temperature difference control furnace temperature fluctuate 3 ºC,ensure that products without color difference,coating dose not fall off.
3,Our company using the internationally recognized big cyclone recovery system powder recovery rate as high as99.2%,ensure no dust spillover.Unique fast color change powder supply center, change color only 10 to 15 minutes.


A: hanan powder coating line

1,No dust spillover, reduce powder waste.
2,Quick color change (10-15 minutes automatic color change), Multi-color change.
3,Powder recovery rate as high as 99.2%
4, Fifth generation of intelligent spray gun, the workpiece groove has no bottoming phenomenon.
5, Full consider the need for color change, easy to clean,Save labor time.
6, Key mechanical parts and electrical components of the equipment adopt the world's top brand products to ensure reliable operation and durability.
7, Beautiful appearance, fine workmanship.



A: hanan powder coating line

If you want to custom made aluminium alloy powder coating line,pls tell us the following specifications:
1.The size of your workpiece .
2.The output of your workpiece(one day=8hours,one month=30days).
3.How many colors do you need to spray?
4.The heating power you prefer:electric,gas,diesel,or coal.
5.The size of your factory(length,width and height).
We could make the design according customer's requirements.Pls contact with me and we will give you the quick reply.


 

Equipment	Application
Pre-treatment System	Better powder coating of the work-piece.
Powder Coating Room	Spraying on the surface of the work-piece.
Big Cyclone	Automatic fast color change.
Transport System	Delivery of work-pieces.
Curing Oven	It makes the powder attaching to the work-piece.
Heating System	The fuel can choose diesel oil,gas,electric etc.